WIT Press


Two-phase Flow Modelling Within Expansion And Contraction Singularities

Price

Free (open access)

Volume

63

Pages

17

Page Range

27 - 43

Published

2009

Size

1,312 kb

Paper DOI

10.2495/MPF090031

Copyright

WIT Press

Author(s)

V. G. Kourakos, P. Rambaud, S. Chabane, D. Pierrat & J. M. Buchlin

Abstract

An experimental study is performed in order to describe the single- and twophase (air-water) horizontal flowin the presence of pipe expansion and contraction. Three types of singularities are investigated; smooth convergence and sudden and progressive enlargement. The opening angles for progressive singularities are 5, 8, 9 and 15 degrees. The surface area ratios tested are σ = 0.43, 0.64, 0.65 and 1.56. Bubbly flow is the dominant flow regime that is investigated for volumetric quality up to 30%. The pressure distribution for both single and two-phase horizontal flow is examined versus axial position. For expansion geometries, it is found that the smaller the enlargement angle, the larger the recovery pressure for the same flow conditions; the pressure drop caused by the singularity is higher in the case of a sharper expansion. The comparison of the experimental results to published models leads to a proposed corrective coefficient for Jannsen’s correlation. Flow visualization is also performed; the flow patterns downstream from the different singularities are identified in each configuration and plotted in Baker’s map for horizontal flow. Keywords: two-phase flow, singularity, sudden expansion, contraction, pressure drop, bubbly flow, flow visualization.

Keywords

two-phase flow, singularity, sudden expansion, contraction, pressure drop, bubbly flow, flow visualization